PDA

View Full Version : '95 Tahoe - Adding the factory keyless entry?



coinball
01-28-2007, 20:45
I'm exploring adding the factory keyless entry onto my Tahoe, I know I can snag the key fobs on ebay and a few online joints have them, but does anyone know what I have to do for the keyless entry module (reciever, or whatever it is called). Also is there a completely different interior wiring harness for the keyless entry equipped vehicles?

Any insight would be appreciated.

Thanks!

bsldallas
02-02-2007, 08:10
On the DLC (under the driver side dash) take and ground the G pin, to see if the door locks lock and unlock. I did this on mine and it had the keyless, then got a remote off of flea-bay, to program the remote ground G pin and the use the remote to lock/unlock, remove ground off of G pin and it should work. Maybe after market might save some $$$

Warren96
02-02-2007, 18:10
I wonder if that would work on mine? ( See below.)

redbird2
02-03-2007, 09:51
i picked up a keyless entry system on e-bay for under $30 took hour to install came with 2 key fobes works great. the remote does look gm however it opens the doors.