fattymak
02-05-2007, 11:02
1. 599 block, magnifluxed, line honed, bored .030 over, new cam bearings and oil pump. $800
2. Balanced rotating assembly, crank polished, new piston bushings, new mahle 18:1 marine pistons ceramic coated .030 over, new standard rod and main bearings, reconditioned rods, flex plate, new harmonic balancer (pistons alone cost 725 from diesel-direct.com) $800
3. Rebuilt turbo 6.5 heads, inserts installed between valves. $600
4. Rebuilt 4911 injection pump has approximately 100 miles on it. $600
5. High pop 40 hp injectors has approximately 100 miles on them. $200
6. Also have a new set of lifters, factory gm turbo, intake and exhaust manifolds, 95 computer and wiring harness, and some new 6.5 injector lines.
All parts are located in Bozeman, Mt. Feel free to email me any questions at fattymak@hotmail.com
2. Balanced rotating assembly, crank polished, new piston bushings, new mahle 18:1 marine pistons ceramic coated .030 over, new standard rod and main bearings, reconditioned rods, flex plate, new harmonic balancer (pistons alone cost 725 from diesel-direct.com) $800
3. Rebuilt turbo 6.5 heads, inserts installed between valves. $600
4. Rebuilt 4911 injection pump has approximately 100 miles on it. $600
5. High pop 40 hp injectors has approximately 100 miles on them. $200
6. Also have a new set of lifters, factory gm turbo, intake and exhaust manifolds, 95 computer and wiring harness, and some new 6.5 injector lines.
All parts are located in Bozeman, Mt. Feel free to email me any questions at fattymak@hotmail.com