GM OPS socket, can't find anything to fit

[xtrempickup]

anybody can tell me where to find the correct GM OPS socket to change my 95 OPS on my 6.5 or who has one they would like to sell. I tried all brands of sockets, nothing was deep enough

[diesel65]

Snap-On A120 socket or use the S6152 crowsfoot that will also work with the oil pressure sensor that is located in the valley under the intake manifold, I think 96' and up.

[xtrempickup]

guess its off to searching for one of those now as i dont see any snap-on dealers

[diesel65]

Go to Snapon .com and order it online, where are you located in Jersey?

[xtrempickup]

yay 60$ after shipping for a tool i'll use once and probably lose. thanks guys

[KenDavis]

I got mine from a local parts distributor, Frank Edwards Company in Salt Lake City.

[EWC]

Will this work ?? Ebay 250087063720

[bmp34]

I was figuring that torque sockets might work because they are straight up and down with no curves like spark plug sockets have. Are they deep enough? I have to do the same thing and sure dont want to pay more than $10 for something that i will use once.

[cabletech]

I got one from NAPA for $10 yesterday. I don't have the part number at work, but can post it when I get home tonight.

[cabletech]

part number is 3458 and it was 10.53 with tax. It's a 6 point socket thats a little deeper than normal deep socket.

Jay