6.2 parts....

[kconnair]

Make an offer.... Going on Ebay in 2 days.

1) 84 or 85 6.2 Heads which look to have had the crack repairs done...
2) 1 set of rods and pistons (rods in excellent shape) Pistons are .75mm over (.030" over) a couple of the pistons got rubbed by the counterweights of a breaking crank. Crank did not seem to damage anything else.
3) Early 6.2 660 block Crank broke (bad balancer), but block appears to be in very good condition - no cracks are visible on the main webs.
4) 1 set of standard pistons... good used condition.

5) complete 6.2 "c" vin engine - unknown, but intact condition - leaky oil pan, but I have an extra to go with it.

Smaller parts and heads I will ship, but keep in mind they are still heavy. Block and engine I won't ship. Dayton, Ohio area for pick up.

I am moving in a few weeks, so these are either sold or they go to the scrap yard.

Kevin.

[john8662]

Tell me about the heads, are they cracked at all between the valves?

Just curious about the crack repair you mention, which is usually the liners in the ports (hard to see w/o removal of plugs).

If they're threaded plugs, they are reman heads by one of the former vendors.

J

[kconnair]

The plugs are threaded, so that is why I think they have had the crack repair. - Just a guess though.

K

[john8662]

You've got a PM.

[kconnair]

Looked in my PM box, but nada.

[Mr. Bone]

Hello,

Looking for the model 80 housing/assembly. I have a military issue truck that came without water drain. Plus it is leaking. If you do not have one do you have any suggestions as to where i might be able to find one?

Thank you.