PDA

View Full Version : wheel seals



derekja
02-16-2007, 18:55
So both Napa and Schuck's give me this part to replace the wheel seal. Unfortunately, that seal is just too big to fit into the hub!

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=SKF&mfrpartnumber=31504&parttype=292&ptset=A

Anybody out there run into this?

This is on a 1998 K3500.

The seal that is in there has the following markings on it: MKS SE59B 602062

bvt
05-01-2010, 19:31
sorry to dig up an old thread but does anybody know where to get that seal. or a cross reference to another seal?
MKS 602062 SE598. its for the sealed unit bearings on a 98 dodge 2500 4x4. found the bearings and races to reduild the hubs all i need is a couple of them seals. O.D is 3.850 ID is 2.990. seals 387A bearing in 382S race. thanks in advance

NH2112
05-01-2010, 21:31
Timken's .pdf online reference doesn't list seals for the unit bearings, which means you'll have to get a good parts store to cross-reference them by dimensions or part number instead of application. Your profile doesn't state where you are, but at work we deal with Eastern Bearings and I've never had a seal they couldn't find for me.