Wanted gear sets

[Robyn]

I am in need of a set of front and rear gear sets for an 82 1/2 ton Burb 4X4
3.73 or 4.10 would be sweet. I have 3.08 now

These can be used as long as they are in good shape.

The front end on this Burb is a corporate case.

Email me through this site or call me

Robyn
(503) 784-3821

[chkline856.2]

What axels are under your burb? I've got 4.10 gears in my 85 3/4 ton truck that I would consider trading you if they fit? I think the front is a 10 bolt and a 14 bolt in the rear. Thanks, Clint

[Ebrown]

Check your local 4x4 clubs for a complete axles For the front you can use a GMC or Chevy Dana 44 or the corp 10 bolt. I bought my from a guy on a local board. The axles I bought my blazer were rebuild from 300.00. The rear is a corp 12 bolt with 3:73 gears install and a new Eaton Posi unit and new brakes, All I need to do is install the 30 spline aftermarket shafts. The front I'm using Are 1991 Corp 10 bolt with 30spline shafts.