jfbushee
04-07-2007, 08:33
Is it possible to test this sensor and if so how can it be done?
DmaxMaverick
04-07-2007, 10:24
It depends on the reason you are asking. The PCM gets its signal from the CPS. If it fails, the PCM will have a fit and tell you so.
If you have a flakey tach, the signal comes from the alternator. If its just inaccurate, the wrong size pulley is the most likely/common suspect.
If you are referring to the '93 mechanical injection pump engine, it only has the alternator input.
Need the sensor for the 4L80E on the 93 .
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.