Installing trailer brake controller '96 2500??

[BradField]

I've searched, and come up with a little bit of info, but can someone give me some detailed install instructions? I have the Prodigy on the way, and need it installed the day that it gets here. My truck has the factory trailer package, so what wires do I need to tie into under the dash, and under the hood?
Thanks,
Brad

[Beedee]

Hi Brad. Try this link, I hope its what you are looking for.
http://www.tekonsha.com/prodig.html
Brian

[BradField]

Brian thank you, that covers the Prodigy end, doesn anyone have something similar for the truck end of the install, what wires to tie the prodigy into for the factory trailer package specifically?
Thanks in advance,
Brad

[MikeC]

Brad,

When you get the Prodigy I believe you will find the instructions complete and easy to follow.

I put a Prodigy on a '96 Burban and an '04 Trailblazer and all was well.

Mike

[HammerWerf]

Brad,

Try this link. I used these when I installed my Prodigy.

http://www.thedieselpageforums.com/tdpforum/showthread.php?t=26780

HammerWerf

[BradField]

Since nobody else mentioned in any of the threads that I looked at the white wire is up inside of your dash, you can not just see it from looking under your dash, you have to start taking the dash apart. Once I did this I found it pretty easily, and then install from that point was very easy.
Brad