PDA

View Full Version : Torque specs fro NV 241????


a5150nut
06-30-2007, 07:37
Anyone have these close at hand? And could PLEASE post them? :)

Thanks
DmaxMaverick
06-30-2007, 11:56
Input Bearing Retainer Bolts = 14 ft. lbs.

Shift Lever Nut = 20 ft. lbs.

Case Bolts = 23 ft. lbs.

Extension Housing Bolts = 23 ft. lbs.

Poppet Screw = 23 ft. lbs.

Indicator Lamp Switch = 17 ft. lbs

Output Flange Nut = 110 ft. lbs.

Transfer Case to Transmission Bolts = 24 ft. lbs.

Did that get 'em all?
a5150nut
06-30-2007, 12:37
Input Bearing Retainer Bolts = 14 ft. lbs.

Shift Lever Nut = 20 ft. lbs.

Case Bolts = 23 ft. lbs.

Extension Housing Bolts = 23 ft. lbs.

Poppet Screw = 23 ft. lbs.

Indicator Lamp Switch = 17 ft. lbs

Output Flange Nut = 110 ft. lbs.

Transfer Case to Transmission Bolts = 24 ft. lbs.

Did that get 'em all?

Nuff for me to get it all going again. Thank you, thank you, thank you. Will have pictures and post what was wrong later. Now off to the machine shop for a good cleaning and R & R 3 bearings........