PDA

View Full Version : Need Fuel Return Hoses



Billy V
07-09-2007, 09:48
I have to replace the fuel return hoses on my 93 6.5

These little buggers are expensive as hell at the dealer!
Does anybody have a source where they can be bought at a reasonable price?

These little hoses between the injectors, with the blue stripe.
http://www.imagestation.com/picture/sraid225/p9143875f093c3de75a6570728d979ad5/e8a95b9b.jpg

DmaxMaverick
07-09-2007, 09:55
Try shopping TDP Advertisers (http://www.thedieselpage.com/vendors/main.htm). Several of the vendors offer more than one option. www.kennedydiesel.com has a nice kit (everything you need for the returns) at a reasonable price. (not an endorsement, just the only vender I've dealt with on the return lines)

cutlas
07-09-2007, 10:56
Just picked up an upgraded version of this hose from a local diesel injection shop. No clips required. Has a cloth braded outer rap. $5.00 per foot.

Robyn
07-10-2007, 08:16
You can also get the little kits that come with the braid covered hose and also comes with some gaskets and stuff too. These can be found on ebay from a few different folks.
I have found them to be the same parts that the local diesel shops sell.

The last pack I bought was $25 for the whole set with gaskets too.
(comes with IP gasket,air top hat gasket and the hoses)

Hope this helps

Robyn

DmaxMaverick
07-10-2007, 11:01
Ebay to your heart's content, but our advertisers have the full injector service kits for $25 and less. The kits include the hoses, clips as necessary, gaskets and injector coppers.

mkhagemann
07-10-2007, 15:26
NAPA and Carquest both offer fuel line return kits for aprox $8.00 us. tell the parts counterperson to check their service line.


1995 C3500HD
1996 C3500HD

tommac95
07-11-2007, 19:38
Since many comments...
The braided stuff is imported from the Krauts , i think. It works without clamps , but usually fails when pulled off, requiring more new.
The OEM needs clamps , sad.
Dr Lee once posted a suggestion to buy small ID urethane line (i think from McMaster) -- this might be the ticket for re-usable , clamp-free fitments {not sure size.} My guess is the OEM line is sized inches , the braid metric.
I got a braid set from Kennedy , i think.