Phaser set

[ercaduceus]

Will a phaser timing gear set for a 95 electromechanical work with a 98 electromechanical?


Thanks,

Mike

[Robyn]

The gear set should be all the same. There was some electronic changes from 95 to 98 but the engines are all the same.

It would even work on a early 6.2 with the use of the proper ballancer I think.

Im sure others will chime in on this too.

Good luck
Robyn

[More Power]

You'll need to verify clearances (as you would with any Phaser installation), but it should work fine.

Jim

[ercaduceus]

Sweet.


Thanks for the info,

Mike