PDA

View Full Version : lookin for used gear vendor for manual 5spd



stacker
10-16-2007, 18:20
Lookin for a used gear vendor any ideas on a good price or place to get a good deal on a new one for a 93 5spd

chipper
10-16-2007, 18:35
Keep in mind, the adapter is specific for each tranny. Adapters are a little pricey when bought separate.The electrical is different for autos & manual.

Inspector
10-25-2007, 14:03
But worth it. I installed a GV on my 93 and it really helped it close put the long reach between the gears on the NV4500. It also put the fun back into shifting gears. As was mentioned the system is pricey and the adaptor is unique. You can get any application of a Gear Vendor and just change the adaptor and if for an auto the electronics are different than the manual. Contact GV and ask for the cost for the adaptor and electronics.
They will not trade adaptors unfortunately.
Bottom line is that the GV gearbox is the same for all apps. The adaptor is unique for an application as well as the electronics. They are great systems. There is also an optional deep sump that can be used that I recommend.
Denny