farmboy1989
03-29-2008, 21:21
I have many parts for a 6.5 diesel engine. It goes as follows:
-2 cylinder heads-no cracks, need exhaust valves checked but should be good
-Left and right exhaust manifolds
-lower intake manifold
-upper intake plenum
-water crossover,96 single t-stat
-5067 injection pump, no pmd, unsure of condition
-complete set of injection lines
-fuel filter housing(just the aluminum part)
-GM4 Turbo complete, good shape, with vaccum canister
-Wastegate Solenoid, worked , only used for a couple months
-flexplate/flywheel for auto tranny
-2 vaccum pumps, 1 known good, other unsure
-left and right valve covers
-oil fill tube and cap
Let me know what you need. I am located in South Central Illinois. My email is farmboy_89_08@hotmail.com and I will try to get a price to you.
-2 cylinder heads-no cracks, need exhaust valves checked but should be good
-Left and right exhaust manifolds
-lower intake manifold
-upper intake plenum
-water crossover,96 single t-stat
-5067 injection pump, no pmd, unsure of condition
-complete set of injection lines
-fuel filter housing(just the aluminum part)
-GM4 Turbo complete, good shape, with vaccum canister
-Wastegate Solenoid, worked , only used for a couple months
-flexplate/flywheel for auto tranny
-2 vaccum pumps, 1 known good, other unsure
-left and right valve covers
-oil fill tube and cap
Let me know what you need. I am located in South Central Illinois. My email is farmboy_89_08@hotmail.com and I will try to get a price to you.