bl78ljb
06-05-2008, 19:37
Well, I needed to change the bulbs in my tail lights the other day and when I removed them I thought it was odd that all 4 screw heads looked remarkably different. When I got them out and all 4 screws were in fact different (top and bottom on both sides) it makes me think that someone lost the proper ones at some time and just used what were around the shop. However, whoever changed the bulbs last also boogered the lights themselves and one hole on each side had nothing actually holding the screw in place except some plastic on the lens (I suspect a larger screw was substituted). Now that I have purchased new tail lights I would like to know what size screw is supposed to be in there, so I can properly replace them.