aftermarket tranny cooler?

[lb7lbz]

hey all, my factory tranny cooler on my 01 dmax is leaking and i would like to replace it with something better however i cant seem to find anything. does anyone know who makes something that will bolt in and how much?

[jbplock]

See the posts by ranch55 in the following thread ..
http://www.thedieselpageforums.com/tdpforum/showthread.php?t=17015

[More Power]

You could also check the two fittings on the cooler. These are the same quick-disconnect type like those used on the transmission. They utilize an o-ring seal.

Also, the crimped fittings where the rubber hose meets the steel tubing have been known to leak (ooze).

Jim

[lb7lbz]

its not the fittings it looks as though it took a rock or something flying up from another vehicle. checked in to the cooler refered to in that post,$450 seems a little steep to me. there must be something else out there

[joed]

You might look at bulkpart.com: http://www.bulkpart.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=2&Category_Code=Allisoncooler

They list some for allisons.

I've bought a couple of coolers from them for my 6.5 with good results.

Joe.