Good Deal?

[Wing Nut OOA]

http://cgi.ebay.com/ebaymotors/6-5-6-5L-Chevy-GM-Marine-Diesel-Fuel-Injector-Nozzles_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66 Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1309Q7c301Q3a1Q7c2 93Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZ item200306154934QQitemZ200306154934QQptZMotorsQ5fC arQ5fTruckQ5fPartsQ5fAccessories

this is extremely cheap from what i've been reading.

i've got my injectors out and DIY rebuilt. the only thing that would make it better would be these nozzels or new stockers.


EDIT:

i guess the better question would be.

are there any adverse side affects, is there any down sides to installing these.

[suburbanK-2500HD]

Hi

The deal looks good, but ?

What brand is the nozzles.????

You will have to have someone to change them, and adjust them for you.
You cant install the into the injecors without adjusting them, and pressure test them.
50HP???? i doubt that..i would think something like20-30 hp with modified exhaust.
you should have freeflowing exhaust at minimum, stock could be restrictive when adding power. The temp would also rise a bit when adding fuel\power.

i would buy a known brand like Bosch or Stanadyne to be safe.
since he is not mention the brand it could be from China.
Ask him before buying.

[arveetek]

Read this thread before you go any further:

http://www.thedieselpageforums.com/tdpforum/showthread.php?t=26767

Casey

[Wing Nut OOA]

i've done a lot more research and these are not a complete waste of money but they are NOT a starting point

these marine injectors are a "supporting mod"

much like upgrading to a HI performance coil and plug wires/spark plugs on a gas engine.


these will support and enhance any existing power adder but they themselves are not a "bolt on" high performance upgrade.