Steel wheel center caps fit Alcoa?

[DA BIG ONE]

Any of you know how to mod steel wheel center cap to fit Alcoa wheel?

[MJEasly]

I cut about 1/4th of an inch from the base of the center cap and left the support pillars alone. I scribed a line around the base of the cap and cut away. You want to make sure the black bolt covers turn at least 2-3 turns or you will lose them. They don't look that bad mounted to my Classics.

[DA BIG ONE]

Originally posted by MJEasly:
I cut about 1/4th of an inch from the base of the center cap and left the support pillars alone. I scribed a line around the base of the cap and cut away. You want to make sure the black bolt covers turn at least 2-3 turns or you will lose them. They don't look that bad mounted to my Classics. Thanks!