Move PMD farther?

[6.5 Detroit Diesel]

So now that I have entered into the world of DS4 pumps, with two 95's, the PMD issue becomes one I personally share. The newest truck had the PMD moved with a home made setup, landing on the side of the plenum bolted to a piece of 3/8 aluminum. I think it's still to close, and want to extend the harness and PMD away from the intake. Is there any help in using bushing's to hold the PMD off the aluminum, milling some slots in the aluminum pad, and mounting a small electric fan on top of the PMD?

And the other question, my ABS light is on. Can a scanner pinpoint the sensor?

[Artworks]

Get a remote PMD / FSD Dtech w/ cooler & extension cable. I have 2, 1 mounted in front of drivers side battery ( Kennedy Diesel) and 1 mounted inside bumper berhind lic. plate (PMDCable.com) But there are more options , just search. But get that driver out of the heat! STAY AWAY FROM CHEAP EXTENSION HARNESS! have had 2 bad ones from EDAM. They will drive you nuts figuring out what is wrong ( bent pins, broken clips and moisture in the connections).