6.5 Parts Blowout!

[Bobbie Martin]

I have way too many parts left over from my projects and need to move them - for the money and the space they take up. I'll make package deals! I have lots of other small parts as well. You can PM me or for fastest response, send me an email (mini1275@bellsouth.net) if you need something.

Like new standard oil pump $25.00
http://i66.photobucket.com/albums/h251/bobbiemartin/Suburban/GEPOilPump1.jpg

1 set of 8 6.5 pistons & rings, standard bore, test run only, $250
Email for more details & pictures - pistons & rings only, rods not incl.
http://i66.photobucket.com/albums/h251/bobbiemartin/pistons/piston-5.jpg

6.5 block - #8 cylinder has a crack at the top. I just had the oil pan off and did not see any web cracks, but I did not remove the main caps. Asking $100 as is.

Pair of used 6.5 turbo heads, diamond precups, $250 for the pair

Crankshaft $100

Also would sell the rods, cam, most all internals from 1997 6.5 TD except timing chain & gears

6.5 DB2 injection lines, good condition, $75 for the set

As new #1 injection line for DB2 without the timing adapter, $25

DS4 injection lines $25.00 set of 8

I have 2 aluminum front timing chain covers, $35 each

Steel back cover for water pump, $20

Crank dampers for DS4 engines, part 10154688. 1 very good $60, one good $40

NA Hummer Headers - One set of 6.5 Diesel Headers, complete with crossover pipe. You need to supply the bolts. Crossover pipes are 2¼" and the collector is 2½". No idea if they will fit a truck, but I can tell you they look the business! A couple of small dents, but very good shape. $75 for all
http://i66.photobucket.com/albums/h251/bobbiemartin/Diesel%20Parts/HummerHeaders-1.jpg

http://i66.photobucket.com/albums/h251/bobbiemartin/Diesel%20Parts/HummerHeaders-2.jpg

24 Volt glow plugs - these look like new. One set of 8, but two were damaged, one is bent and unusable, one has a bent electrical prong, may be OK, not sure. All ohm good. $35
http://i66.photobucket.com/albums/h251/bobbiemartin/Diesel%20Parts/24vglowplugs.jpg

24 Volt cold start sensor. Wire has slight damage, but ohms good and looks like new. $10

Crossover from Hummer? Has 24 volt glow plug controller, temp sensor and thermostat & cover part # 12554091 cast on. $35.00
http://i66.photobucket.com/albums/h251/bobbiemartin/Diesel%20Parts/NAcrossover.jpg

NA intake - like new, Has 23500011 cast on manifold. $40.00
http://i66.photobucket.com/albums/h251/bobbiemartin/Diesel%20Parts/NAintake.jpg

One set of 8 Genuine Bosch 311 "Marine" injectors, used for only 10-15,000 miles. I sent these to a well known injection shop to be tested and the pop pressure set. I was told they were "burned" and should be replaced. They came out of a well running engine. $50 for all 8, good for beater or cores.

2 rebuilt 6.5 fuel injectors $40.00

1997-1999 Fan Clutch, Genuine GM, part # 15022302 fits HO water pump with bolt on fan clutch and later 4 bolt 6.5 and Duramax fans, excellent cond. $50.00

Flex fan for serpentine belt setup, came off used 6.5, includes spacer & mounting hardware, totally eliminates the fan clutch, fits 4 bolt water pump. $20.00

Factory Oil Cooler and lines from 1995 6.5 Diesel, lines were replaced with new lines from dealer in 2004, no leaks, complete set up, includes 4 new O rings & new spring clips. I can include block adapters if required, I have both sizes of block adapters so your choice. $50.00

Throttle Position Sensor for DB2 pump $50 or with wiring connector $85.00

Radiator from 1995 Suburban 6.5, has trans cooler in RH tank, aluminum with plastic end caps. Never leaked, some bent fins, I replaced with new as precaution. $50.00

Hummer hydraulic fan clutch, as new $50 Fan & lower 4 V belt pulleys, $25 each
Water pump, test run only $25
http://i66.photobucket.com/albums/h251/bobbiemartin/Suburban/GEPBlockfront.jpg

Turbo Kit Includes:
GM3 Turbo with mechanical wastegate. Spins free, good condition, includes 90 degree elbow to exhaust and clamp for down pipe.
1993 Turbo Diesel Exhaust manifolds, has one or two broken crossover studs, otherwise good cond. Can include crossover, its a little beat but usable. No down pipe.
1993 Turbo Intake manifold, upper & lower, NON EGR,
I do not have the rubber hose from turbo to intake manifold
Exhaust heat shields
One heat shield for glow plugs under turbo.
Turbo brace to intake manifold mount bolt
Turbo brace to upper intake
Turbo Oil return tube, hose and plate for fuel pump.
CDR valve
$300 plus shipping takes it all or will sell separate, email for details

Used Autolite glow plugs. Set of 8, all ohm good, $30

Oil fill tube & cap $20

Crank timing chain cog for electronic engines with reluctor cast on, like new, $15.00

Valve covers Turbo Type, one CDR, one regular $50 pair, NA type 2 X regular $35.00 pair

All prices plus shipping or pick up free in Jacksonville, Florida
If you nee a small parts and don't see it listed, please email. I have lots more parts, but have not had time to catalog everything. Thanks!

[Tough Guy]

Are the pistons still available?

Chris

[Bobbie Martin]

Are the pistons still available?

Chris

Yes they are.
Thanks, Bobbie

[Bobbie Martin]

The following have been sold:
NA Hummer Headers
GM 3 Turbo has been sold, the rest of the parts are for sale separately

1993 Turbo Diesel Exhaust manifolds, has one or two broken crossover studs, otherwise good cond. Can include crossover, its a little beat but usable. No down pipe. $75.00

1993 Turbo Intake manifold, upper & lower, NON EGR, $75.00

Exhaust heat shields $10 each

Turbo brace to intake manifold mount bolt $5.00
Turbo brace to upper intake $5.00
Turbo Oil return tube, hose and plate for fuel pump. $25.00
CDR valve $25

Also have used 6.5 starter $50.00

Sale pending on the Radiator from 1995 Suburban 6.5

[Tough Guy]

Do you happen to know what size they all are?

Chris

[Bobbie Martin]

Do you happen to know what size they all are? Chris

Standard bore "J" pistons

[southernk30]

ill take

Turbo brace to intake manifold mount bolt $5.00
Turbo brace to upper intake $5.00

shipping is 22039

also what shape is the cdr in?

How do you want to be paid?

Andrew

[Bobbie Martin]

ill take

Turbo brace to intake manifold mount bolt $5.00
Turbo brace to upper intake $5.00

shipping is 22039

also what shape is the cdr in?

How do you want to be paid?

Andrew
PM send but I have not heard back. If you still want this, let me know.
CDR came of a running truck, that is all I know.

[Bobbie Martin]

Hummer water crossover & flex fan are sold

[Bobbie Martin]

Time to move this stuff! New lower prices.

Like new standard oil pump $20.00

1 set of 8 6.5 pistons & rings, standard bore, test run only, $125.00
Email for more details & pictures - pistons & rings only, rods not incl.

6.5 DB2 injection lines, good condition, $60 for the set

As new #1 injection line for DB2 without the timing adapter, $25

DS4 injection lines $25.00 set of 8

I have 2 aluminum front timing chain covers, $25 each

Steel back cover for water pump, $20

Crank dampers for DS4 engines, part 10154688. 1 very good $50, one good $25


24 Volt glow plugs - these look like new. One set of 8, but two were damaged, one is bent and unusable, one has a bent electrical prong, may be OK, not sure. All ohm good. $25

NA intake - like new, Has 23500011 cast on manifold. $40.00

2 rebuilt 6.5 fuel injectors $40.00

1997-1999 Fan Clutch, Genuine GM, part # 15022302 fits HO water pump with bolt on fan clutch and later 4 bolt 6.5 and Duramax fans, excellent cond. $40.00

Factory Oil Cooler and lines from 1995 6.5 Diesel, lines were replaced with new lines from dealer in 2004, no leaks, complete set up, includes 4 new O rings & new spring clips. I can include block adapters if required, I have both sizes of block adapters so your choice. $45.00

Throttle Position Sensor for DB2 pump $50

Hummer hydraulic fan clutch, 4 V belt pulleys for fan & lower crank and the Water pump, test run only $75 takes it all


1993 Turbo Diesel Exhaust manifolds, has one or two broken crossover studs, otherwise good cond. Can include crossover, its a little beat but usable. No down pipe. $50

1993 Turbo Intake manifold, upper & lower, NON EGR $50
Used Autolite glow plugs. Set of 8, all ohm good, $25

Oil fill tube $10.00

Crank timing chain cog for electronic engines with reluctor cast on, like new, $15.00

Valve covers for CDR valve $25 each

CDR valve $20

Exhaust heat shields $10 each

Turbo brace to intake manifold mount bolt $5.00
Turbo brace to upper intake $5.00

Good used 6.5 starter $45.00

[Bobbie Martin]

Pistons are sold!

[Tough Guy]

Pistons are sold!

Thanks for those!

Chris

[Bobbie Martin]

The following parts are still available:

6.5 DB2 injection lines, good condition, $60 for the set

DS4 injection lines $25.00 set of 8

Aluminum front timing chain cover, $25

Steel back cover for water pump, $20

Crank dampers for electronic 6.5 Diesel engines, part 10154688. 1 very good $40, one good $20

2 rebuilt 6.5 fuel injectors $40.00

Factory Oil Cooler and lines from 1995 6.5 Diesel, lines were replaced with new lines from dealer in 2004, no leaks, complete set up, includes 4 new O rings & new spring clips. I can include block adapters if required, I have both sizes of block adapters so your choice. $45.00

Throttle Position Sensor for DB2 pump $50

Hummer hydraulic fan clutch, fan & lower 4 V belt pulleys and water pump & backplate , test run only $75 for all, parts are as new

1993 Turbo Diesel Exhaust manifolds, has one or two broken crossover studs, otherwise good cond. Can include crossover, its a little beat but usable. $50.00
1993 Turbo Intake manifold, upper & lower, NON EGR, $50.00

Used Autolite glow plugs. Set of 8, all ohm good, $25

Crank timing chain gear for electronic engines with reluctor cast on, like new, $15.00

Valve covers with or without CDR fitting $25 each

Flex plate for 6.5 with 4L80E $30.00

Cover for trans/flex plate $20.00

Exhaust heat shields $10 each

Turbo brace to intake manifold mount bolt $5.00 Turbo brace to upper intake $5.00

[Bobbie Martin]

6.5 Oil Pan, good used $25.00

Set of freeze plugs (new) $10

Engine bearings, for non oil squirter block, main & rods, test run only, PM for details

Crank dampers for electronic 6.5 Diesel engines, part 10154688.
1 very good $40, one good $20
Installer for damper $25.00

DS4 injection lines $25.00 set of 8

Aluminum front timing chain cover, $25

Steel back cover for water pump, $20

2 rebuilt 6.5 fuel injectors $40.00

Factory Oil Cooler and lines from 1995 6.5 Diesel, lines were replaced with new lines from dealer in 2004, no leaks, complete set up, includes 4 new O rings & new spring clips. I can include block adapters if required, I have both sizes of block adapters so your choice. $45.00

Hummer hydraulic fan clutch, fan & lower 4 V belt pulleys and water pump & backplate , test run only $75 for all, parts are as new

1993 Turbo Diesel Exhaust manifolds, turbo side has one broken crossover stud, should be an easy fix, otherwise good cond. Can include crossover, its a little beat but usable. $50.00 for all

Crank timing chain gear for electronic engines with reluctor cast on, like new, $15.00

Valve cover with CDR fitting $25

Used CDR $20

Flex plate for 6.5 with 4L80E $30.00

Cover for trans/flex plate $20.00

heat shield for exhaust manifold under turbo $10
Turbo brace to intake manifold mount bolt $5.00
Turbo brace to upper intake $5.00
Starter brace $5.00, starter heat shield $10.00

All parts used unless stated otherwise.

[chestatee]

Sent pm
Michael