PDA

View Full Version : Stock lift- gpm and psi



Kmehr
07-19-2010, 14:40
Anyone know what the gmp/gph and psi specs are for the stock lift pump?

Also, the max psi you would want to send to the IP?

Thanks

JohnC
07-19-2010, 18:34
The DS4 IP has an internal transfer pump that sets the internal pressure. It has a pressure relief valve on the inlet that limits the pressure coming in. Unlike the DB2 pumps, any pressure greater than zero is fine. There is a volume spec, but I'm not sure I recall it correctly. It may be a quart in 30 seconds. That should be enough; it works out to about 4 mpg at 120 mph...

Kmehr
07-20-2010, 09:43
Sweet thanks, John

6.5TDTahoe
07-24-2010, 09:43
Obtain & install stock 1993/3500 series ACDelco lift pump. Best lo buck solution! Direct to stock fuel line & electrcial plug installation.