View Full Version : Gauges don't work and it keeps popping fuses
phatcyclist
10-13-2010, 15:01
I had my gauges go out the other day and thought that it was no more than a fuse. Well, I replaced the fuse and went to start my vehicle today and as soon as I turned the key to "run" the gauges jumped a little but the fuse was blown.
Unplug the fuel heater on top of the filter housing, it's powered through the instrument fuse and if it shorts it'll blow the fuse.
phatcyclist
10-14-2010, 09:00
A previous owner patched the fog light relay into the gauge cluster fuse circuit. Luckily it was just a spade connector pushed into the fuse block and I took it out. The wire was run through the fender :rolleyes: and ended up grounding out. The gauges work fine now.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.