Where to tap for boost on 2011 LML

[cowboywildbill]

I haven't pulled the cover off the intake on the LML yet, so I don't know if or how much different the LML is from the last one I did, which was my 02 Dmax. Quite a while ago.
Anyone done one yet? Is there a line I can tee into? Or do I have to drill into the intake?
I really don't want to drill, but will if neccesary. Any pictures of an install would be great. Thanks

[cowboywildbill]

I tapped into the aluminum sleve that is just before the intake manifold from the intercooler. It was quick and easy and I got all of the chips from drilling by doing the old grease on the bit trick and a small straw size tube on the shop vac. Works great.