Wanted: 6.2L Turbo and manifolds.

[K5-CJ5]

Im looking for a turbo and manifolds for my 6.2. If you have one for sale let me know, im in northern California so the closer the better for shipping.

[K5-CJ5]

Just pulled the motor to find out that its a 6.5 block. I would like 6.5 manifolds, turbo, and intake if anyone has it.

[Yukon6.2]

Hi
It dosn't matter which engin 6.2/6.5 all manifolds will interchange.
The body stlye of your truck will dictate which exhust manifolds you can use.
Again with a little work you can use any manifold in any body style,but some will require more fabrication skills to get them to work.
I'm going to assume you want to turbo charge your K5 Blazer.
If that is the case the easiest way is to find yourself a "Banks" turbo kit for the year of truck you have.
The stock 6.5 turbo manifolds will work,but you will run into problems with the down pipe running into the frame,and if you have AC there will be interfrance issuses with the heater cover.
Good Luck
Thomas

[K5-CJ5]

Thanks for the info. I have a banks in my 82, but would really prefer the 6.5 manifolds and turbo because I will running a stack so frame rail clearance is not an issue. The Blazer im building is a rock crawler so fabrication is already happening.

[onebadvette]

http://www.thedieselpageforums.com/tdpforum/showthread.php?t=38879

[arveetek]

I have a complete 6.5L turbo system I pulled from a '97 3500. It has the GM-8 turbo. I have everything: both exhaust manifolds, crossover pipe, downpipe, oil feed line, oil drain line w/ adapter plate; and I also have the airbox, filter, and intake manifold from my '95 1500. It is the EGR style intake system.

The only thing you would need to supply is some form of wastgate control, such as a Turbomaster.

I'm located in SW Missouri, so it would have to be shipped.

If interested, PM me.

Casey