Log in

View Full Version : Need Crankshaft Pulley 6.2 J code


corymkishp2
05-09-2011, 20:51
Does anybody out there have a source for 6.2L J code engine parts? Need a 3 groove crankshaft pulley to complete a rebuild job. Also need a fresh air tube/duct.
Thanks, Cory
millwrightjesse
05-10-2011, 14:26
i have an air water seperator if you need one
Kennedy
05-16-2011, 14:18
I should have a pulley here that I bought quite a few years back. As I recall it was supposed to be a dampened pulley like the serp belt units, but was not. This was a new GM pulley.

Now if I can only find it...
chestatee
05-20-2011, 05:39
Have a complete 1990 j code engine still in truck. Tell me what you need and I will pull it at a fair price.

Michael


Does anybody out there have a source for 6.2L J code engine parts? Need a 3 groove crankshaft pulley to complete a rebuild job. Also need a fresh air tube/duct.
Thanks, Cory
Kennedy
05-23-2011, 05:08
I should have a pulley here that I bought quite a few years back. As I recall it was supposed to be a dampened pulley like the serp belt units, but was not. This was a new GM pulley.

Now if I can only find it...

I located this pulley. It has 3 large grooves and attaches with 3 bolts to the balancer. I'm not sure that this is a 6.2 pulley. Back when I got it I think I got the number from Avant as a supposed "dampened" pulley.
chestatee
05-26-2011, 12:29
I located this pulley. It has 3 large grooves and attaches with 3 bolts to the balancer. I'm not sure that this is a 6.2 pulley. Back when I got it I think I got the number from Avant as a supposed "dampened" pulley.

What year is the engine your building? The pulleys on the late model 6.2 are not a 3 groove- more like a six groove. As I posted earlier I have a complete 1990 J code with a 6 or so groove(would have to count) available at a fair price.

Michael
Kennedy
05-30-2011, 18:24
I believe the OP is looking for a V belt pulley with 3 grooves and you are talking about a single serpentine belt pulley, but it also appears to be a dead topic.
chestatee
07-31-2011, 09:17
What the deal with this John????????? Think about it.
MDS

I believe the OP is looking for a V belt pulley with 3 grooves and you are talking about a single serpentine belt pulley, but it also appears to be a dead topic.