PDA

View Full Version : Wanted: Serpentine Belt Setup from 1996+ 6.5L diesel



Edahall
06-21-2011, 09:29
I'm looking for a serpentine belt setup from a 1996 and newer 6.5L. I'll need all the brackets, water pump and the fan/clutch assembly.

Vin82k3500
09-14-2011, 14:45
are you still looking for this I have parts off a 96 just laying around including the water pump

Vin82k3500
09-14-2011, 14:47
are you still looking for this I have parts off a 96 just laying around including the water pump
I also have a gm 8 turbo Im not gonna use since I decided not to run a turbo

Edahall
09-15-2011, 13:18
Yes, I'm still looking for those parts to transplant the 6.2L diesel in my 1982 Suburban into my 99 Tahoe. The vehicle will be used mainly for solo driving so I'll leave it non aspirated and high fuel economy and engine longevity will be the goal here.

Vin82k3500
09-15-2011, 15:48
I will go out in the truck of my car and make sure I have all the parts you need I dont need them I was gonna go with the newer serp belt on my 6.2 and I decided to keep it original set up so if i need anything i just order it for an 82 chevy k30 with a 6.2 no hassle at the parts stores or if I stop for an oild lube and filter 1500 miles from home if we can figure out shipping and your are interested your welcome to what I have I know the vaccum pump is no good though but all the brackets and stuff were there last i knew my poor car there burried in the truck of my 04 maxima under a dismantled lly engine

Edahall
09-16-2011, 18:25
Thanks a lot. I look forward to getting this project rolling forward.

spdgofast
09-18-2011, 10:52
I think I have most of the stuff you need along with a good vacuum pump (not sure if you need this)? Let me know if Vin82k3500 doesn't get you what you need.