Help with shifting 6.5 PLEASE

[RandyMayley]

I just replaced my 1999 6.5 engine with a mechanical inj. pump military engine.
The pedal pot is hooked up parallel to the cable linkage, but that did not help.
I suspect that I need to tie the camshaft sensor on the new engine to the computer so it will read RPM and shift. I also get a 1643 "engine rpm out error code."
Any ideas will help, Thanks, Randy :mad:

[Robyn]

The engine speed sensor is off the tranny on these.

Getting the 4L80E working well with the DB2 pump can be a challenge.

The trick is to get the 92-93 style TPS switch tied in with the Pedal position sensor leads that feed from the middle pot on the PPS

Dick Wells here has got a Burb working fairly well.

Give Dick a shout (PM) and see if he can advise you.

Missy
-