chestatee
02-25-2012, 13:56
1994 6.5 TD - F Code with 155k, pulled from wrecked k2500. The engine had a head gasket leak the heads rebuilt and magnafluxed,, Fuel injection Pump - DS4-5068 less than 35k ago and starter.
1) $350 - Longblock with 155 k recent valve job
2) $250 - Injection Pump has appx 35k on pump with working driver - Model #L5-DS4-5068 for HD Trucks.
3) $50 - Fuel injection Lines - EFI
4) $40 - Fuel filter canister with working heater and water sensor
5) $35 - Single Thermostat Housing and Neck
6) $250 - Complete Serpentine Mounting Brackets and Hardware- Alternator (105 amps), P/S Pump, Vacume Pump and A/C Pump - all good working items
7) $50 - Starter -35 k
8) $450 - GM 4 Turbo less than 50k on it (no play, binding spins freely), upper and lower intake, turbo side exhaust manifold, braided oil line and other mounting hardware.
9) $30 - Turbo side valve cover if needed for conversion project
10) $30- Passenger side exhaust
11) $20 - Crossover pipe
12) $50 -Torque Converter
13) $25 - Flexplate
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=10
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=11
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=12
Also, parting out a 95 model HD 6.5 TD - F Code with 90k and a new fuel injection pump replaced under GM warranty. I bought the engine from “Chicago Transit Maintenance”, the truck was totaled sometime ago and the engine and Trans was pulled and stored, in case it was needed for another truck. I haven’t had the time to do anything with it except for inspecting the engine and the records on the truck before buying. I will be pulling the pan to inspect and getting IP # in a week and then posting.
More Part’s Pic’s at Link below;
http://photobucket.com/Chevy6-5TurboDieselParts
-Shipping Cost not included in Price of Parts - unless noted next to the Price of Part.
-Or Local Pickup at 30528 North of Atlanta, GA.
-Payments through PayPal or Cash Only on Pickup items - no checks.
chevytrucksonly@windstream.net
Thanks,
Michael Steele
Cell - 706-969-0451
Home - 706-348-8946
1) $350 - Longblock with 155 k recent valve job
2) $250 - Injection Pump has appx 35k on pump with working driver - Model #L5-DS4-5068 for HD Trucks.
3) $50 - Fuel injection Lines - EFI
4) $40 - Fuel filter canister with working heater and water sensor
5) $35 - Single Thermostat Housing and Neck
6) $250 - Complete Serpentine Mounting Brackets and Hardware- Alternator (105 amps), P/S Pump, Vacume Pump and A/C Pump - all good working items
7) $50 - Starter -35 k
8) $450 - GM 4 Turbo less than 50k on it (no play, binding spins freely), upper and lower intake, turbo side exhaust manifold, braided oil line and other mounting hardware.
9) $30 - Turbo side valve cover if needed for conversion project
10) $30- Passenger side exhaust
11) $20 - Crossover pipe
12) $50 -Torque Converter
13) $25 - Flexplate
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=10
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=11
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=2&pictureid=12
Also, parting out a 95 model HD 6.5 TD - F Code with 90k and a new fuel injection pump replaced under GM warranty. I bought the engine from “Chicago Transit Maintenance”, the truck was totaled sometime ago and the engine and Trans was pulled and stored, in case it was needed for another truck. I haven’t had the time to do anything with it except for inspecting the engine and the records on the truck before buying. I will be pulling the pan to inspect and getting IP # in a week and then posting.
More Part’s Pic’s at Link below;
http://photobucket.com/Chevy6-5TurboDieselParts
-Shipping Cost not included in Price of Parts - unless noted next to the Price of Part.
-Or Local Pickup at 30528 North of Atlanta, GA.
-Payments through PayPal or Cash Only on Pickup items - no checks.
chevytrucksonly@windstream.net
Thanks,
Michael Steele
Cell - 706-969-0451
Home - 706-348-8946