chestatee
09-09-2012, 16:57
Parting out 92 dually 6.5td K3500 4x4 Nv4500 with 157k original miles.
Besides the parts listed below there are many other parts available, so please make a post or email me and I would be glad to assist you with pricing and any other need you have; alternators, A/c units, p/s pumps, electrical components for interior and exterior, interior parts, exterior parts, headlights etc.
Pics at:
- $600 - Engine-Long block 6.5td #599 casting, 157k low mile original engine runs great, good compression etc. I have been driving truck and it runs as a 6.5td should with a small turbo
.
- $450 -4911 mechanical fuel injection pump - has apx 15 k on it and bought from Stanadyne as new/rebuilt I’ve been driving the truck around farm and the pump is performing like a newly rebuilt one should. (I need 4911 core or core charge $200)
- $200 - Hi flow Marine Delphi Injectors-HTI 6703603, were installed new 15k ago around same time as IP and turbo was.
- Complete/Plug & Play Serpentine Belt Setup; with working A/C, Alternator, P/S Pump, Serp Pulleys, belt tensioner, all Serp Brackets and mounting hardware.
1) $750 OBO - HD Flatbed for dually, in good shape, no dents etc. The truck was a fleetside new-the flatbed is 8’6” long x 8/2” wide. Wheelbase is 134”½
2) $400 - Rear axle 4.10 ratio-GT5
3) $250 - Front Axle
4) $75 - Turbo- GM3 with apx 15k
5) $65 - Fuel Canister w/heater etc
6) $35 - Single Thermostat Manifold and Housing
7) $60 - Turbo Side Exhaust manifold
8) $35 - Drivers Side Exhaust manifold
9) $100 - Lower Intake
10) $35 - Upper Intake/Plenum
11) $45 - Oil Pan
12) $240 - Complete/Plug & Play Serpentine Belt Setup; with working A/C, Alternator, P/S Pump, Serp Pulleys, belt tensioner, all Serp Brackets and mounting hardware.
Pics Below
Payments through - http://payments.amazon.com - No Fees No Hassle. Or you can send a certified cashiers check or postal order.
Shipped or pick up locally at 30528 - North of Atlanta, GA.
chevytrucksonly@windstream.net
Michael
Main 706-348-8946
Text/Call 706-969-0451
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=210
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=209
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=208
Besides the parts listed below there are many other parts available, so please make a post or email me and I would be glad to assist you with pricing and any other need you have; alternators, A/c units, p/s pumps, electrical components for interior and exterior, interior parts, exterior parts, headlights etc.
Pics at:
- $600 - Engine-Long block 6.5td #599 casting, 157k low mile original engine runs great, good compression etc. I have been driving truck and it runs as a 6.5td should with a small turbo
.
- $450 -4911 mechanical fuel injection pump - has apx 15 k on it and bought from Stanadyne as new/rebuilt I’ve been driving the truck around farm and the pump is performing like a newly rebuilt one should. (I need 4911 core or core charge $200)
- $200 - Hi flow Marine Delphi Injectors-HTI 6703603, were installed new 15k ago around same time as IP and turbo was.
- Complete/Plug & Play Serpentine Belt Setup; with working A/C, Alternator, P/S Pump, Serp Pulleys, belt tensioner, all Serp Brackets and mounting hardware.
1) $750 OBO - HD Flatbed for dually, in good shape, no dents etc. The truck was a fleetside new-the flatbed is 8’6” long x 8/2” wide. Wheelbase is 134”½
2) $400 - Rear axle 4.10 ratio-GT5
3) $250 - Front Axle
4) $75 - Turbo- GM3 with apx 15k
5) $65 - Fuel Canister w/heater etc
6) $35 - Single Thermostat Manifold and Housing
7) $60 - Turbo Side Exhaust manifold
8) $35 - Drivers Side Exhaust manifold
9) $100 - Lower Intake
10) $35 - Upper Intake/Plenum
11) $45 - Oil Pan
12) $240 - Complete/Plug & Play Serpentine Belt Setup; with working A/C, Alternator, P/S Pump, Serp Pulleys, belt tensioner, all Serp Brackets and mounting hardware.
Pics Below
Payments through - http://payments.amazon.com - No Fees No Hassle. Or you can send a certified cashiers check or postal order.
Shipped or pick up locally at 30528 - North of Atlanta, GA.
chevytrucksonly@windstream.net
Michael
Main 706-348-8946
Text/Call 706-969-0451
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=210
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=209
http://www.thedieselpageforums.com/tdpforum/picture.php?albumid=1&pictureid=208