pcm pin layout and wiring diagram 6.5td

[land's end 4x4]

Hi,

I have fitted a 6.5td from a 2000 postal van into a defender, I am now finnishing the project but have a few issues.

1 input wires control lights like high beam indicators handbrake etc.
And most of all the input wire from the brake pedal.

Have searched ours to find a wiring diagram but just can't find it.

attached a picture of the pcm and the project

hope someone can help me out

[land's end 4x4]

I can't upload a image off the PCM, but here is another post I placed some time ago,

http://www.thedieselpageforums.com/tdpforum/showthread.php?t=41772

[More Power]

I can help if you can wait a few days. A couple of other pressing projects need to be taken care of first. I have the 1996 & 1998 service manuals. Your project looks interesting.

Jim

[land's end 4x4]

That would be graet,

I need to put the defender thrue the MOT, I will have to bend some rules to do so without the check lights but will manage I ques. (the landrover is 26 years old so...less rules apply)

I'll have to finsh the roll cage anyway so enough to do for the moment...

I look forward to hear from you.

[DennisG01]

I have an AllDataDIY subscription - if you can tell me exactly what circuits you're looking for, maybe I can post a picture of the wiring schematic - it's for a '98, but probably the same? FYI, the subscription is dirt cheap.

[land's end 4x4]

Hi,

I have taken a --AllDataDIY subscription-- perfect!!!
Wish I knew that before...would have saved lots of trouble.

Kind Regards,


Louis

[DennisG01]

Great! I'm glad it helped! Good luck with the rest of the project.

After it's all done, how long do you think you can keep it so nice and shiny? ;):)