reset odometer

[amos68]

Oops!:confused: I posted in wrong forum.

2005 2500HD Duramax

How do I reset the odometer after a oil change?

[rapidoxidationman]

get the DIC to read the oil filter life then push and hold the back arrow on the steering wheel until it resets.

RTM.

[More Power]

I assume you mean resetting the "change oil" warning. Your owner's manual will outline what you need to do. In my 2001, it's as simple as quickly depressing the accelerator pedal three times soon after rotating the ignition key from off to run.

Altering the odometer requires a dealer reprogram of the instrument panel using specialized equipment - a process that is regulated by law.

Welcome to the board!

Jim

[amos68]

Resetting the "change oil" warning setting the "change oil" warning light. What is +DIC"?

[jbplock]

DIC = Driver Information Center .. Here's a snip from my 03 manual ..

"The DIC display is located on the instrument panel
cluster above the steering wheel. The DIC can display
information such as the trip odometer, fuel economy and
personalization features."

If you have buttons (A, B, C, D) on the steering wheel there are extended features available as follows:

"A (Trip Information): This button will display the
odometer, personal trip odometer, business trip
odometer, hourmeter, annual log and the timer.

B (Fuel Information): This button will display the
current range, average fuel economy, instant fuel
economy and engine oil life.

C (Personalization): This button will change personal
options available on your vehicle.

D (Select): This button resets certain functions and
turns off or acknowledges messages on the DIC.
If your vehicle is not equipped with the DIC steering
wheel buttons you will not have all of the features listed
above, and you will turn off, or acknowledge DIC
messages by using the trip odometer reset stem located
on the instrument panel cluster.

DIC Operation and Displays

The DIC comes on when the ignition is on. After a short
delay the DIC will display the current driver and the
information that was last displayed before the engine
was turned off.
If a problem is detected, a warning message will appear
on the display. Pressing the select button will
acknowledge any current warning or service messages.
The DIC has different modes which can be accessed
by pressing the four buttons on the DIC. These buttons
are trip information, fuel information, personalization
and select.
If your vehicle is not equipped with the DIC steering
wheel buttons not all of the features listed will be
available on your vehicle."