PDA

View Full Version : wanted: 6.2 700r4 bracket



84M1008
09-18-2014, 13:39
let me know thanks

Dvldog8793
09-18-2014, 19:12
I have a 1984 van with factory 700r4 and 6.2, if the bracket is the same, I can give you estimate on making one....

84M1008
09-19-2014, 03:15
how much

Dvldog8793
09-19-2014, 15:09
Howdy
My van has cruise control so it looked like it has two brackets bolted together. If it is just the bracket for the cable that goes to the trans then I would say probably in the $75-100 range. This would be fabricated and welded with holes machined. I know that sounds high for a little bracket but I would have at least a couple hours into making it. Not to mention pulling it off my van to get a look at it.
Other bad news is that I am gunsmith as well and right now is a BUSY time of the year so it would most likely be after November before I got to it.
seems to be a demand for them so I might use this as a winter project and make 10 of them. Price would probably go down if I do.

mike91
09-30-2014, 11:57
Hello, I am rebuilding [restoring] a 1985, 6.2 and i have the [6.2 700r4 bracket], but price is steep, $125.00.00 w/shipping, mike91