Where can I look up torque specs online?

[jrsavoie]

I am changing the lower intermediate steering shaft on the K1500 6.5 diesel GMC Suburban.

It has 2 bolts, one at each end. Where do I find the torque specs for the bolts?

Thanks

[DennisG01]

I would imagine a service manual would have this info? Maybe even a cheap one such as Chilton or Haynes? I bought an ALL DATA DIY (online) a few years back - inexpensive, too. I don't use it a lot, but it has come in very handy at times. I just copied and pasted this, is this what you were looking for?

Intermediate Shaft:

Coupling Pinch Bolt 30 Nm (22 ft. lbs.)
Upper To Lower Steering Shaft Bolt 62 Nm (46 ft. lbs.)

[jrsavoie]

I would imagine a service manual would have this info? Maybe even a cheap one such as Chilton or Haynes? I bought an ALL DATA DIY (online) a few years back - inexpensive, too. I don't use it a lot, but it has come in very handy at times. I just copied and pasted this, is this what you were looking for?

Intermediate Shaft:

Coupling Pinch Bolt 30 Nm (22 ft. lbs.)
Upper To Lower Steering Shaft Bolt 62 Nm (46 ft. lbs.)


Thanks for the numbers!

I was hoping to find something online, I found online manuals for my Toro Lawn mowers and Mitsubishi diesel engines

[DennisG01]

All Data is probably the way to go, then. There may be something else out there, but this has been working well for me, anyways. And it was a pretty cheap subscription, too.