Front wheel speed sensors,,,

[94GMC2500]

On a 95 K3500 dually 4WD do I have to remove the front wheel bearing and then drive out the wheel studs and remove brake disk to replace the wheel speed sensors?

[DmaxMaverick]

To replace the wheel speed sensor, you'll need to replace the hub/bearing assembly (which may have the studs already installed). Double check, but I think they were R/L specific.

[94GMC2500]

Pretty sure brake disk on a 95 goes on the back side of the wheel flange, not between the wheel and the hub like the newer stuff.

[DmaxMaverick]

OK. Then you'll have to drive studs.