Been hunting an erratic shift problem. Today I found oil in the pass through connector. Ive read this could be the cause of my shift issues. What is the best way to remedy this problem?
Pass through, as in "on the tranny" ????
4L60 OR 4L80 ???
A poor connection can cause troubles for sure.
Replace the tranny side wire harness and plug. (internal)
Clean the chassis harness with electrical spray cleaner and reassemble
Good luck with the gremlin.
Robyn
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.