PDA

View Full Version : Automatic A/C control panel problems



oneton
02-14-2016, 16:28
Hi guys, working on an issue where the function door is stuck on defroster. Funny thing is I can command the door to move and get air out of all the outlets with the Modis. I suspected the control panel so I bought a new one. It didn't work so I pulled it out and called it a day. Next day, I plugged it back in and it worked perfectly but when I turned the key off and back on, from that point. it hasn't worked since. Any ideas?



Thanks
D

More Power
02-15-2016, 14:02
I'd want to eliminate a flaky servo motor or sticky door as causes before spending a lot more. Also, I'd want to measure the signal/voltage to the servo motor to verify that it is in spec.

oneton
02-15-2016, 16:29
Thanks MP! I'll take a look at those and see what shows up. I appreciate the help!

EdHale
02-16-2016, 06:20
I had the same problem last summer. It was a bad servo.

oneton
02-17-2016, 18:57
Thanks Ed.