PDA

View Full Version : Wastegste solenoid



svcattle
06-24-2016, 23:07
Where is the waste gate solenoid ? I'm trying to put my vacuum hoses back to normal right now somebody has reversed em Is what I was told any way I can make 15 psi boost so if I'm not careful I am always in limp mode .

svcattle
06-24-2016, 23:51
Ok found the solenoid the hoses aren't reversed they're gone vaccum pump is plumbed directly into the wastegate so now what I need to do is run the orange line from the pump to the solenoid figure out which Is the in hole which is the out and hook er Bach up

svcattle
06-25-2016, 14:49
Ever feel like your talking to yourself

gvig
06-25-2016, 15:21
Some time it is that way, TDP isn't as active as it was a couple of years ago, it takes more patience now than then but there are some very wise and capable people on here.

svcattle
06-25-2016, 16:21
Yes this is a good site I always post then try to find the answer myself with enough searching and then finally somebody will answer and we get it figured out