6.2 I jector socjet

[86 CUCV]

Is a specific injector socket mandatory, or can I use a 32mm extra deep socket to clear the injector top?

[DmaxMaverick]

The "injector socket" just makes it easier, especially when removing/installing them with other junk in the way (it has a hex top like a spark plug socket, so an end wrench can be used). Use whatever works, as long as the socket engages the LOWER flats, and doesn't damage the return nipples.

[86 CUCV]

Thank you. Expected as much just wanted to be sure.
For those curious that 32 mm is also 1-1/4" (less .009")

[arveetek]

I've used a standard socket, but ground it down on the outside for extra clearance.

Casey