duallie question

[maverick_935]

I was thinking about going from a dually truck set up to singles. is this a possibility. what rims or changes would I have to make

[Yukon6.2]

It should be simple to convert to singles.
Are you changing all 4 ?
The fronts have off set spacers you unbolt from the hubs
The rears should be no problem,going the other way is the issue as usually the brake drums on SRW are to big for the daully wheel to go over.
The rear end on a daully is wider if you have a pickup box on the truck,there is a dually up here that has a high performance engine in it,it's lowered and has wide singles on the back and looks OK

[maverick_935]

was planning on changing front and rear dually the mud. was looking at Rickson rims. figure to call and check with them