PDA

View Full Version : 6.5L Turbo Diesel Blazer Project - "Back from the Dead"



More Power
09-13-2024, 11:49
https://www.youtube.com/watch?v=9Il2deqwXLA

Introduction: This "Murdered Out" 1994 6.5L Turbo Diesel Chevy Blazer was brought "Back from the Dead" after the engine sat in a thousand pieces for over 11 years. We solved the problems caused by melted pistons, a gouged crankshaft, and cracked cylinder heads.

Had fun with this one! Check it out. There's some new video that hasn't been shown before... scattered throughout the video, including at the very end.


I recommend that you create a YouTube account. It's easy and free to register at YouTube.com (http://YouTube.com), plus you'll be eligible for free stuff here in The Diesel Page very soon. We'll begin offering all member-only online content here at TDP (https://www.thedieselpage.com/password.htm) free of charge to those who are subscribed to our YouTube channel. Your YouTube account name will be linked to the free access list. So, subscribe and send me your Youtube account name and let me know what you'd like for a password (different from your Youtube password). You'll be helping our channel to grow and you get free stuff in return as a Thank You. Easy-peasy!
Jim

More Power
09-13-2024, 12:43
If the video appears slightly out of focus, it may be because your YouTube viewer isn't displaying the video in the highest resolution. Depending on your viewing device, YouTube or your settings may be showing you a low-res video. Nearly all of our videos were produced in 1080P resolution.

https://www.thedieselpageforums.com/tdpforum/attachment.php?attachmentid=7713&d=1726256358

Select the "Tools" feature in the lower right side of the video, and change the video quality to the highest setting. Notice the "HD" notice on the Tools button shown here. Let me know if you have any trouble!