oil pressure sender

[oka065]

Can you please tell me what thread the oil pressure sender is or is there somewhere else on the block that is easier to access for an oil pressure sender. Also what size tube spanner do i need to remove the sender.

Regards

Rod

[Rollie Raper]

I removed mine with a 1-1/16" deep well socket.

[fastcat800]

Take the two bolts out that hold the fuel filter in and all stuff that's in the way can be moved. It took me 15 minutes to change my OPS.

[MTTwister]

Rod - are you looking for another place to tap into for a mechanical oil pressure gauge? Not that I can help you, just wanting to clarify...

[JohnC]

Originally posted by oka065:
Can you please tell me what thread the oil pressure sender is This is sort of a guess, but I think it's 1/4" pipe thread.

[Marty Lau]

Originally posted by Dave Schumacher:
Take the two bolts out that hold the fuel filter in and all stuff that's in the way can be moved. It took me 15 minutes to change my OPS. I'm a clutz so it took me 30-40 minutes. redface.gif

[oka065]

Thanks Guys, being a centre turbo I ended up removing the inlet into the turbo & the crossover. Jobs all done now. Next onto the cooling mods.

Regards

Rod ;)

[Barry Nave]

Staying warm down under ;)
I,m cold :D