PDA

View Full Version : Early results of DRW to SRW conversion



jdmetcalf57
10-20-2004, 03:38
I figured by this conversion I could gain about 1.5-2mpg and my first tank of fuel since the conversion seems to confirm this. I got 15.5mpg mostly pulling my camper. I usually get 13-14 doing this.
The way I figure this every 40K when I replace my tires I will save about $800-900 tires and fuel.

Now I've got to get it converted to a manual trans.

I'll post further results latter.

vernj4
10-22-2004, 20:02
jd...what exactly did you do? remove inner or outer tire? change tire size? change fenders?

jdmetcalf57
10-25-2004, 09:07
I have purchased a take off SRW bed to replace my dually bed. I am going to purchase or have made 2.5" spacers to use a single dually on the back. This will make the wheels track very close to the front. I will then be able to use front wheel wheel simulators all the way around.

On a factory SRW K3500 the wheel track is about 6" narrower than the front so my set up should work better than factory and look better.

S\W Off Road
10-25-2004, 13:37
jdmetcalf57, Is your truck a 2 wheel drive? or is it a 4x4?

jdmetcalf57
10-25-2004, 15:22
4 wheel drive, You can tell by the K3500, 2wds are C3500

S\W Off Road
10-25-2004, 18:02
Great! Lets trade hubs? I'm going from a SRW to a DRW. I have the rear axle but I need the front hubs that you have and you need my hubs. What do you think?