GM shop manual

[LTD1963]

I just bought a 94 6.5L Yukon. My first diesel. It is a little rough. I plan on bring it back into shape. My first project is to go over the engine and figure out what needs to be replaced or rebuilt. Does anyone know where I can get the GM factory service manuals for a 6.5L? Ive got a lot to learn and thought these might be a good place to start. I would like to do as much work on it myself as possible. Thanks

[ttpost]

check out alldata.com, my local chevy dealer uses them. it is 25.00 a year and is updated every 1/4. saved me thousands in repairs.

[Scooby]

Helm is the publishers for the official GM manuals. The ones for my 96 c1500 were 126.00 last November. These manuals are excellant

[LTD1963]

Thanks for the info. Im not sure what ill get but now I know where to find them. Thanks Again.

[332bill]

You can also get the genuine GM manuals on Ebay. I purchased the 4 volume set (gently used) for my burb for $75. As was mentioned, they are $126 from helm.

Bill

[Marty Lau]

I use AllData DIY for the $25 yr it is very good what
many dealer use.

[ttpost]

renewal for all data and any other car you add is only 15.00 a year its worth every penny. 16 ga is right

[LTD1963]

Well I took a look at All Data and thought about it. At work, a lot of my manuals are on CD and I really dont like looking things up on CD. So I bought a set of manuals from Helm. Kind of expensive ($145 with shipping) But I will be able to flip thru the pages. Thanks for the support. Im sure you guys will be answering a few more questions soon. As this is a restoration/performance project of my 94 Yukon. I would like to have alot of it completed by spring.
Thanks again