PDA

View Full Version : "Change fuel filter" message on DIC



Kennedy
01-11-2005, 06:23
15228758 N/A New software to allow DIC message informing the driver that the fuel filter must be changed.


Now let's see what drives the message interval...

More Power
01-11-2005, 09:21
Is this mileage driven like the oil change message? My hunch is that it is.

Thanks for the update.

MP

Kennedy
01-11-2005, 09:38
Very little info available at this time. Doesn't appear to apply to 2004 models at this time, but that could change.

I'll be loading the update today hopefully. Then I'll see what the Tech 2 can "see" as far as resetting the message...

Kennedy
01-12-2005, 15:01
Well, I installed the update, but I got a "batttery not charging" message on the DIC and a PO622 code was set. Thankfully, I have my own SPS setup which is CD driven and a month behind so I had the old calibration available. I reloaded it with the old calibration and the code/message cleared. I'll wait and see if anything develops on the GM side before I try again...

madmatt
01-12-2005, 18:26
I haven't heard about this one yet. what year/s does it apply to? I've got an 05' that I have to bring in the shop tomorrow, I'll see what I can come up w/ as far as what SPS has on it.....what does it calculate by, how to reset it and so forth.