I agree, likely a head gasket failure. Less likely could be a cracked block/cylinder.
If you're only doing head gaskets, while they are easier
Thanks, Jim. I winced when I started losing cabin heat and much of my coolant blowing out the reservoir. A chem test confirmed the leak. I resigned myself
malpana Today, 12:33My guess is that your engine has a head gasket leak. I'd pull the heads to evaluate, and only then make any plans to go further. Your engine may not need
More Power Today, 12:20Hi, all. I've got combustion gases in my coolant, so I'm pulling the engine (in my sig) to replace the gaskets and get the heads checked. This stock engine
malpana Today, 12:08
Rings and bearings while I have the engine out?
An oil analysis might tell you if you have a bearing issue or not. If you do, you must fix it or you're wasting your time doing the head gaskets. On
JohnC Today, 16:16