ewww, "spring clip"....the only thing I see on the male fitting is a "collar" and I see nothing inside the female coupler...
spongebob Today, 08:05The tool is only needed for disconnecting. The fitting should click into place and lock on with minimal effort. Make sure the spring clip is in place,
DmaxMaverick Today, 07:28Ok I got the "quick" disconnect fitting to come off using the tool, but I cant seem
to get the new one back on, do I insert the "disconnect"
Maverick is spot on.
These units have a bad habit of leaking internally through the heater unit and the fuel leaks out around the wire in
If downtime is a factor, be sure to have an entire replacement assembly (OEM, or of any flavor) on hand before grabbing a wrench. When the FFM leaks,
DmaxMaverick 04-25-2024, 06:29