Normally, I would say no, not necessarily high/low because of indicated high/low cylinders. In my experience, it is not, as long as the PWM's track closer
DmaxMaverick 05-22-2025, 13:55The current programming is factory. I messed up years ago with the Predator, and had to have the dealership reflash the ECM. Since then I've not needed
More Power 05-22-2025, 09:44Mine has always done that. Before and after injector replacements (mine's had 2, as well as a separate return line replacement after filling the crankcase
DmaxMaverick 05-21-2025, 13:37
P0087 fuel rail pressure low limp under high loads
Lets talk about the L5P for a second. Recently I have been shown the CEL and the Idash calls out a code for the MAP sensor along with a reduced engine
Inspector Yesterday, 20:27