• Recent Forum Posts

    DickWells

    Update on an old Burb.

    Okay. Well, then, why doesn't it push foam out the PS return? This is why I posted the question about further testing and possibilities. IIRC (You'd think

    DickWells Today, 21:16 Go to last post
    DmaxMaverick

    Update on an old Burb.

    It isn't making sense. Seeing is believing, but I'm not seeing. Air has to come from the pump. If the pump is pushing fluid, everything is under pressure,

    DmaxMaverick Today, 18:52 Go to last post
    DickWells

    Update on an old Burb.

    Ooooookay. As soon as I came down harder, on my hose clamp at the plastic cap/air valve end of my pressurizer, my leak stopped. A session with a spray

    DickWells Today, 16:13 Go to last post
    DickWells

    Update on an old Burb.

    Thanks, Robyn and DMax.
    Made up an 1.5 in clear hose, with cap, valve and clamps. Clamped it onto the filler tube and used a battery-powered tire

    DickWells Today, 12:36 Go to last post
    DmaxMaverick

    Update on an old Burb.

    The aluminum (not plastic) cylinder inboard of the HB unit is the reserve accumulator. DO NOT mess with it. It retains full system pressure (until it

    DmaxMaverick Yesterday, 16:23 Go to last post