When I first joined here I had a 94 K2500. After reading about electrical and ground problems I picked up a can of oil electrical cleaner. I attacked
a5150nut 04-19-2025, 17:43Thanks Dmax for your input. I too was thinking ign. switch. I’ll probably just replace the switch. And the FSD extension harness because it was carried
Goose57 04-19-2025, 04:24A lot of this isn't adding up. There's only a couple common suspects for most, if not all, of the issues. The Ign. Switch. If your IPC (Instrument Panel
DmaxMaverick 04-18-2025, 20:57Thank you for your reply. Yea this is going to be a hard one to figure out. It’s just so weird it does it like clockwork in the morning and then randomly
Goose57 04-18-2025, 19:45
Cuts out after start ups
Of course, the Nut is right about the importance of good grounds. And, speaking of grounds, there is one in particular that is exceptionally important,
DmaxMaverick 04-19-2025, 20:49