there was no clips or spring but I got it, now Im not to the short hose on the EGR, hope there's
something in the archives...
the coupler
The end of the heater core tube should only have a barb ring on it, as should the male end of the quick connector. You should be able to see the spring
DmaxMaverick Today, 10:41ewww, "spring clip"....the only thing I see on the male fitting is a "collar" and I see nothing inside the female coupler...
spongebob Today, 08:05The tool is only needed for disconnecting. The fitting should click into place and lock on with minimal effort. Make sure the spring clip is in place,
DmaxMaverick Today, 07:28
heater hose going back on...
The plastic spring clips used to be steel wire spring clips. They work the same.
DmaxMaverick Today, 19:53What was the problem with it not locking on?