ewww, "spring clip"....the only thing I see on the male fitting is a "collar" and I see nothing inside the female coupler...
The tool is only needed for disconnecting. The fitting should click into place and lock on with minimal effort. Make sure the spring clip is in place,
Ok I got the "quick" disconnect fitting to come off using the tool, but I cant seem to get the new one back on, do I insert the "disconnect"
Maverick is spot on. These units have a bad habit of leaking internally through the heater unit and the fuel leaks out around the wire in
If downtime is a factor, be sure to have an entire replacement assembly (OEM, or of any flavor) on hand before grabbing a wrench. When the FFM leaks,
Sections
Categories (Show All)
Recent Articles
Recent Article Comments Widget Recent Forum Posts
heater hose going back on...
ewww, "spring clip"....the only thing I see on the male fitting is a "collar" and I see nothing inside the female coupler...
spongebob Today, 08:05